Camfil is pleased to announce its support of a new ISO 16890 standard that is an alternative to the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) 52:2 standard that has been used in the U.S., and EN779 that was used in Europe and other parts of the world. ISO 16890 creates a global standard that brings harmony and unity to the way air filter efficiency is measured.
Test Drive: Camfil Air Filters – Quick Cost Comparison
“We welcome the new ISO standard, because of its worldwide application to air filtration efficiency,” stated Kevin Wood, Camfil USA Vice President Sales & Marketing. “To this point, there has not been a global standard that eliminates confusion between countries as to which of the standards in use are superior. This was a decision that was made with the cooperation of all countries involved, which shows the need for a standard that all stakeholders could agree was necessary given the challenges we face fighting pollution across the globe.”
The ISO 16890 standard – which took effect on December 1, 2016 – creates new guidelines for air filter efficiency with values that replace the old ASHRAE standards’ Minimum Efficiency Reporting Value (MERV). In the past, ASHRAE 52.2 and EN779 were a cause of confusion among air filter consumers as they were unsure how to compare efficiency rates in countries that did not use the same standards.
“This new standard clears the field for both air filter consumers and air filter manufacturers,” added Wood. “With ISO 16890, comparisons are now useful, because every filter is subject to the same standards. Therefore, consumers can compare air filtration products and devices on an equal basis, and decide what works best for their needs. In the long run, this will also benefit consumers because it will drive out some of the lower-quality products from the market.”
The ISO 16890 Standard also rates the ability of air filters to trap ultrafine particles, referred to as PM1, that are one micron or less in diameter. Furthermore, air filters are now tested for efficiency when they are new, and also after their electrostatic charge has faded or been removed. This secondary testing is important because studies have found that electrostatic charges artificially enhance air filter performance during lab testing. The requirement of a second test now provides a true analysis of an air filter’s capability to trap hazardous particles.
About
Camfil is the world leader in air filtration and clean air solutions, with 23 production plants and R&D centers in the Americas, Europe, and the Asia-Pacific region. For more information, visit us online at www.camfil.us.
Check out our:
Camfil Air Filters – Quick Cost Comparison
Lynne Laake
T: 888.599.6620,
F: Friend Camfil USA on Facebook
T: Follow Camfil USA on Twitter
Y: Watch Camfil Videos on YouTube
