Installing a garage door is an investment. You have to count the expense of buying the door, but also the cost of labor. However, you can save yourself the latter if you have some DIY notions and some skills. From the new garage door installation, garage door maintenance company, we tell you how to install a garage door.
You may be wondering how to install a garage door to find out if you could do the job yourself. Read on if you want to know the process of installing a garage door.
How to Install a Garage Door
The first thing you have to know is that the installation will depend on the type of door you have chosen. In this article, we are going to briefly explain how a sectional garage door is installed, which is one of the most popular options, although it can serve as a guide for installing other types of doors.
Guidelines for Introducing a Sectional Garage Door
The initial step is to quantify the hole where the entryway will be introduced. It is significant that you have these reasonable measures to keep away from any issue with the entryway you choose to purchase.
The following undertaking to be done is to gather the sub-outline, that is, the two vertical metal bars joined to another level one that will work as an attaching lintel. It should be plumb with the assistance of wedges and a level, and it should be brought up where it should be bored later to hold it.
Presently it's an ideal opportunity to gather the fundamental casing. To do this, the vertical and bent aides of the casing should be mounted, which should be connected to the verticals of the sub casing and the back bar that gives the design a 'U' shape. The eventual outcome ought to be as an objective once the aides are appended. In this progression, you should utilize a level and a stepping stool.
Next, the time has come to put the back bar to square the corners. This progression is vital since, supposing that the design isn't sufficiently square, the board can rub against the guide and will keep the entryway from rising. To do this, you need to attach the advisers for the roof.
You have to make sure that the door goes all the way around. Before fully positioning the vertical frames, it is important to check that the door will be able to travel from top to bottom inside the vertical guides. You also have to make sure that there is the same distance over its entire length.
The next step is to put the braces that go to the ceiling. You have to use some angles already drilled and in the shape of a 'T' that is fastened to the ceiling, and you must use the meter to place them. These will square the hole so that it does not miss-square the door. Expansion screws can be used to secure them when the ceiling is made of concrete.
The next thing will be to place the shafts and bearings on the vertical rail. The help of a screwdriver will be needed. The ends of the shaft must be placed in the lateral bearings, and the central support of the latter must be fixed to the front. You also have to put the sealing rubbers. It is necessary to assemble the panels and fasten the hardware to their hinges. It is important to leave some slack with the wheels when laying one on top of the other.
Finally, it remains to press and calibrate. The cables must be passed through the pulleys and fastened so that the springs have the proper pressure. The cables will be taught to the rollers. It only remains to push up all the side panels and check them.
This is the procedure for new garage door installation. If you think that it is going to be too complicated for you, you can contact a professional by clicking garage door technicians and garage door experts.
It is true that regardless of the door you buy, the most common is that it comes with its respective installation instructions. However, our recommendation is that you have experienced help if you are not very clear about how to do the job.
When a garage door is installed, the intention is that it lasts for many years, but a bad installation can cause many problems in the future, both in terms of operation and safety.
How to Automate a Garage Door
So far, we have explained how to carry out the installation of the door. However, more and more people are looking for the convenience of an automated garage door.
If this is your case, you can try to automate the door on your own. To do this, you must purchase and install a motor. As in the previous point, the motor to install will depend on the type of door you have chosen.
We are going to tell you how to install a motor in a tilting garage door since it is another of the most popular alternatives.
One of the aspects that you should know about this type of door is that they are not without risks. In fact, one of the most common breakdowns has to do with the breakage of the springs or cables that hold them.
For this reason, more and more people choose to automate them since they consider that it is a way to increase their security and reliability.
Instructions for Automating a Tilting Garage Door
The steps to follow to install or home garage door, repair the motor, and automate a tilting garage door are the following:
- The first thing to do is mount the rail or stem of the motor. In general, this is usually divided into several pieces. It is important to check that the chain or belt is installed correctly and is moving correctly.
- The next step is to fix the rail to the door shaft.
- Then it is time to place the motor on the roof and connect it to the electrical network. The motor must be assembled to the rail and the front part of the rail to the motor bracket. Then the motor must be raised until it is level and fixed to the ceiling. Finally, the motor must be connected to the electrical network. Keep in mind that this connection has to be of good quality to avoid problems in the future.
- The last step is to attach the rail to the motor and to the door. Specifically, the arm that comes out of the rail must be fixed to the door anchor.
As you can see, it is a somewhat complex procedure, so most people decide to hire a professional to take care of the installation.
If, after knowing the installation process, you have decided to hire an expert, you can request a free quote from this link.
Obviously, this is an installation example focused on up-and-over garage doors. But, as we have already mentioned, you can automate any other type of door: sliding, folding, etc.
In any case, our advice is that you have the help of a person who is knowledgeable in the matter.
Maintenance Tips for Garage Doors
After all the effort related to installation has been made, garage doors are often exposed to weather conditions. This exposure can end up affecting your performance, and it is a shame that it occurs when it can be avoided.
The solution in the garage door maintenance case is to change the configuration of the control panel to give the door more time to complete the opening or closing.
Another potential problem is humidity. In fact, it can cause damage to the motor of automatic doors, especially if it is installed outside. That is why it is important that you check the joints and check their good condition.
Here are Some General Maintenance Tips for your Garage Door:
- Check the door periodically to ensure its good condition. Ideally, check it every three months or so.
- Make sure that the door is always well lubricated, and check the chafing systems (hinges, lock, and latches) to avoid wear and noise.
- In relation to the sliding doors, the guides must be kept very clean since the leaf circulates through them; it is a way to avoid obstructions.
- It is also convenient to monitor the springs and check if they have lost tension in case they need to be adjusted again.
Media Contact:
Fix Garage Doors CA
(888) 242-0777
https://fixgaragedoors.ca/
61 Abner Miles Dr. Maple, ON L6A 1S2
Original Source of the original story >> New Garage Door Installation: A Complete Guideline
